In-Situ RuggedReader Operators Manual for Blue RuggedReader - Manual (Page 28)

28
0055450 rev. 002 10/07 Rugged Reader Operator’s Manual
Entering Information
You have several options for entering information into your RuggedReader
using the stylus.
On-screen Keyboard utility (the default input method)
Letter Recognizer—recognizes character strokes and gestures
Block Recognizer—recognizes letters from single strokes
Transcriber—recognizes cursive, print, or mixed handwriting
When you are ready to enter text, you can switch from the default input
method (keyboard) by following these steps:
1. On the bottom center of the screen, tap the
arrow next to the input method icon .
If the arrow is not displayed, tap the input
method icon, then tap the arrow.
2. The input method menu appears, as shown
here. Tap the input method you want from
the list of options.
3. Using the selected input method, enter your
text.
SECTION 3: USING THE HARDWARE
TIP: For more
details about
each input
method, go to Start >
Settings > Input and choose
the input method from the
Input window.