GW Instek GDS-800 Series Programming Manual - Manual (Page 72)

GDS-806/810/820/840 Programming Manual
71
:WMEMory:OFFSet
After the “:WMEMory:LOCate” command is specified, you can adjust the
position up or down by this command.
Syntax
:WMEMory:OFFSet
Arguments
→Specify the location of RefA or RefB memory (1|2)
is the desired offset position. The rage is from –100 to +100.
:WMEMory:SAVe
Select whether the memory set will be saved.
Syntax
:WMEMory:SAVe <1|2|3>
Arguments
→Specify the location of RefA or RefB memory (1|2)
1
→Channel 1
2
→Channel 2
3 →Math function