beautypg.com

GW Instek GDS-800 Series Programming Manual User Manual

Page 56

background image

GDS-806/810/820/840 Programming Manual

55

:TEMPlate:TOLerance

(Available for firmware 2.0 and above only)

Sets and query the tolerance of auto template.

Before running this command, the oscilloscope has to be initialized as “Auto

Template” mode, please add the command of “:TEMPlate:MODe 1” in order to

change the settings.

Syntax

:TEMPlate:TOLerance

:TEMPlate:TOLerance?

Arguments

is the desired tolerance percentage. The range is from 0.4~40 (or 0.4% to

40%).

Returns

%

Note: Before input any template editing commands, the oscilloscope has to be initialized,

please add the command of “:GONogo:FUNCtion 1” in order to initial the oscilloscope.

See also other documents in the category GW Instek Equipment: