beautypg.com

GW Instek GDS-800 Series Programming Manual User Manual

Page 40

background image

GDS-806/810/820/840 Programming Manual

39

:GONogo:NGCount? (query only)

(Available for firmware 2.0 and above only)

Return the value of fail count and total count.

Syntax

:GONogo:NGCount?

Returns

:GONogo:NGDefine

(Available for firmware 2.0 and above only)

Sets and query the user-defined NO-GO conditions. This command is equal to the

function key “F4” pressing for UTILITY menu of second page.

Syntax

:GONogo:NGDefine {0|1}

:GONogo:NGDefine?

Arguments

0

→Define waveform NOT exceed the

template means NO-GO

1

→Define waveform exceed the

template means NO-GO

Returns

Note: Before running any Go/NoGo commands, the oscilloscope has to be initialized, please

add the command of “:GONogo:FUNCtion 1” in order to initial the oscilloscope.

See also other documents in the category GW Instek Equipment: