GW Instek GDS-800 Series Programming Manual - Manual (Page 25)

GDS-806/810/820/840 Programming Manual
24
:ACQuire:LENGth
Select the number of record length. This oscilloscope provides record length of 500,
1250, 2500, 5000, 12500, 25000, 50000, and 125000.
Syntax
:ACQuire:LENGth {0|1|2|3|4|5|6|7}
:ACQuire:LENGth?
Arguments
0
→Record length is 500
1
→Record length is 1250
2
→Record length is 2500
3
→Record length is 5000
4
→Record length is 12500
5
→Record length is 25000
6 →Record length is 50000 7→Record length is 125000
Returns
:ACQuire:MODe
Select the waveform acquisition mode. There are four different acquisition mode:
sample, peak detection, average and accumulate.
Syntax
:ACQuire:MODe {0|1|2}
:ACQuire:MODe?
Arguments
0 →Select the sample mode 1 →Select the peak detection mode
2 →Select the average mode
Returns
Note: Please select the specific acquire mode before implement any acquisition.