GW Instek GDS-800 Series Programming Manual - Manual (Page 22)

GDS-806/810/820/840 Programming Manual
21
*RCL
Recall the setting data from memory which previous saved. The settings of RS-232
(or GPIB) can be stored in memory of M1~M15. However, if users recall the stored
memory which the settings of RS-232 or GPIB are different with present settings,
the RS-232 (or GPIB) settings will keep with the present situation. The RS-232 (or
GPIB) settings will not to be influenced by the recall setting of RS-232 (or GPIB) for
this moment.
Syntax
*RCL
Arguments: 1~15
Examples
*RCL 1 recalls the setting data which located at first position of memory address.
*RST (no query form)
Sets all control settings of oscilloscope to their default values but does not purge
stored setting.
Syntax
*RST
*SAV
Saves the setting data to memory.
Syntax
*SAV
Arguments
1~15
Examples
*SAV 2 saves the setting data to the second position of memory queue.