beautypg.com

GW Instek GDS-800 Series Programming Manual User Manual

Page 38

background image

GDS-806/810/820/840 Programming Manual

37

:DISPlay:WAVeform

Select the dots (or vectors) display for data.points.

Syntax

:DISPlay:WAVeform <0|1>

:DISPlay:WAVeform?

Arguments

0

→Enable vectors display

1

→Enable dots display

Returns

:GONogo:CLEar

(Available for firmware 2.0 and above only)

Clear the total and failure counter value on the screen. This command is equal to

the function key “F5” of GO/NO-GO template edit menu.

Syntax

:GONogo:CLEar

Examples

:GON:CLE clear the GO/NO-GO counter displayed.

Note: Before running any Go/NoGo commands, the oscilloscope has to be initialized, please

add the command of “:GONogo:FUNCtion 1” in order to initial the oscilloscope.

See also other documents in the category GW Instek Equipment: