GW Instek GDS-800 Series Programming Manual - Manual (Page 45)

GDS-806/810/820/840 Programming Manual
44
:MEASure:SOURce
Select the measured channel (channel 1 or 2). The default setting of measured
channel is channel one.
Note: Please select the specific channel before implement any measurement.
Syntax
:MEASure:SOURce {1|2}
Arguments
1 →Enable the measurement functions for channel 1
2
→Enable the measurement functions for channel 2
Returns
.
:MEASure:VAMPlitude? (query only)
Return the voltages of high value minus the low value.
Syntax
:MEASure:VAMPlitude?
Returns
.
Note: Please select the specific channel before implement any measurement. See
explanation for “:MEASure:SOURce”