GW Instek GDS-800 Series Programming Manual - Manual (Page 71)

GDS-806/810/820/840 Programming Manual
70
:WMEMory:DISPlay
Select whether the stored waveform will be displayed after being saved.
Syntax
:WMEMory:DISPlay
:WMEMory:DISPlay?
Arguments
→Specify the location of RefA or RefB memory (1|2)
0
→OFF
1
→ON
Returns
:WMEMory:ERASe
Select whether the stored waveform will be erased after being saved.
Syntax
:WMEMory:ERASe
Arguments
→Specify the location of RefA or RefB memory (1|2)
:WMEMory:LOCate
Set the position of stored waveform.
Syntax
:WMEMory:LOCate
Arguments
→Specify the location of RefA or RefB memory (1|2)
is the desired position. The rage is from –200 to +200.