GW Instek SFG-830 User Manual - Manual (Page 26)

SFG-830 p.23
) Execution Error
An error number in the range [-299, -200] indicates that an IEEE488.2 syntax
error has been detected by the instrument’s execution control block. The
occurrence of any error in this class shall cause the execution error bit (bit 5) in
the event status register to be set.
Error Number Error Description
-200 Execution error
-201 Invalid while in local
-222 Data out of range
-225 Out of memory
-240 Hardware error
) Device-Specific Error
An error number in the range [-399, -300] indicates that he instrument has
detected an error which is not a command error, a query error, or an execution
error. The occurrence of any error in this class shall cause the device-specific
error bit (bit 3) in the event status register to be set.
Error Number Error Description
-311 Memory error
-313 Calibration memory lost
-314 Save / recall memory lost
-315 Configuration memory lost
-330 Self-test failed
-350 Queue overflow
) Query Error
An error number in the range [-499, -400] indicates that the output queue
control of the instrument has detected a problem with the message exchange
protocol described in IEEE488.2. The occurrence of any error in this class
shall cause the query error bit (bit 2) in the event status register to be set.
Error Number Error Description
-410 Query INTERRUPTED
-420 Query UNTERMINATED
-430 Query DEADLOCKED