GW Instek GDS-2000 series Programming manual - Manual (Page 60)

GDS-2000 Series Programming Manual
60
:MEASure:SOURce
Select the measured channel (channel 1, 2, 3, or 4). The default setting of
measured channel is channel one.
Note: Please select the specific channel before implement any measurement.
Syntax
:MEASure:SOURce {1|2|3|4}
Arguments
1→Enable the measurement functions for channel 1
2→Enable the measurement functions for channel 2
3→Enable the measurement functions for channel 3
4→Enable the measurement functions for channel 4
Returns
.
:MEASure:VAMPlitude? (query only)
Return the voltages of high value minus the low value.
Syntax
:MEASure:VAMPlitude?
Returns
.
Note: Please select the specific channel before implement any measurement. See
explanation for “:MEASure:SOURce”