GW Instek GDS-2000 series Programming manual - Manual (Page 13)

GDS-2000 Series Programming Manual
13
The USB connection testing
User may test the USB connectivity of oscilloscope and computer by using a
hyper-terminal program. For instance, a free PC hyper-terminal program of
“MTTTY.exe” was an example here.
This “MTTTY.exe” file may download from following link:
http://www.jps.com/downloads/support/mitty.html
Furthermore, a required driver for Windows2000/XP operation system which
named “dso_cdc.inf” should be downloaded for company website.
Testing steps:
1. Turn on oscilloscope and press UTILITY → F2 → F1 to change the interface
as USB interface.
2. Connected both oscilloscope and computer with a USB cable type AB.