GW Instek GDS-2000 series Programming manual - Manual (Page 14)

GDS-2000 Series Programming Manual
14
3. Download the “inf” oscilloscope USB driver file from company website. Right
click the “inf” oscilloscope USB driver file and install it into the target computer.
4. If driver file is installed successfully and USB interface of oscilloscope working
normally, user may check the COM port number by opening the “Device
Manager”, one of the specific COM port should be assigned as the
communication port for both oscilloscope and computer.
5. Open the “MTTTY.exe” and select the properly COM port number. Only the
COM port is necessary for setting, please ignore all other communication setting
items.