GW Instek GDS-2000 series Programming manual - Manual (Page 55)

GDS-2000 Series Programming Manual
55
:MEASure:LFFDelay? (query only)
Return the time value that difference time between the first falling edge of source1
signal and the last falling edge of source2 signal.
Syntax
:MEASure:LFFDelay?
Returns
.
Note: Please select these two specific measured sources before implement the delay time
measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”
:MEASure:LFRDelay? (query only)
Return the time value that difference time between the first falling edge of source1
signal and the last rising edge of source2 signal.
Syntax
:MEASure:LFRDelay?
Returns
Note: Please select these two specific measured sources before implement the delay time
measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”