GW Instek GDS-2000 series Programming manual - Manual (Page 56)

GDS-2000 Series Programming Manual
56
:MEASure:LRFDelay? (query only)
Return the time value that difference time between the first rising edge of source1
signal and the last falling edge of source2 signal.
Syntax
:MEASure:LRFDelay?
Returns
Note: Please select these two specific measured sources before implement the delay time
measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”
:MEASure:LRRDelay? (query only)
Return the time value that difference time between the first rising edge of source1
signal and the last rising edge of source2 signal.
Syntax
:MEASure:LRRDelay?
Returns
Note: Please select these two specific measured sources before implement the delay time
measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”
:MEASure:NWIDth? (query only)
Return the value of timing measurement of the first negative pulse in the waveform.
Syntax
:MEASure:NWIDth?
Returns
.
Note: Please select the specific channel before implement any measurement. See
explanation for “:MEASure:SOURce”