GW Instek GDS-2000 series Programming manual - Manual (Page 49)

GDS-2000 Series Programming Manual
49
:HARDcopy:MODe
Select the hardcopy output style. The entire LCD screen, waveform raw data,
oscilloscope settings can be saved on flash disk or print out the entire LCD screen
to mostly USB printers.
Syntax
:HARDcopy:MODe {0|1|2}
:HARDcopy:MODe?
Arguments
0→ Save image 1→ Save all
2→ USB Printer
Returns
:HARDcopy:RATio
Select the print-out image size for hardcopy function. The adjustable range is from
10% to 100%. The one hundred percent will fill the entire image with selected
printer’s paper size; ten percent will reduce 90% of image size with original selected
printer’s paper size. The default setting is 50%.
Syntax
:HARDcopy:MODe
:HARDcopy:MODe?
Arguments
between 10~100
Returns
%