GW Instek GDS-2000 series Programming manual - Manual (Page 51)

GDS-2000 Series Programming Manual
51
:MEASure:FALL? (query only)
Return the value of timing measurement that taken for falling edge of the first pulse
in the waveform.
Syntax
:MEASure:FALL?
Returns
.
Note: Please select the specific channel before implement any measurement. See
explanation for “:MEASure:SOURce”
:MEASure:FFFDelay? (query only)
Return the time value that difference time between the first falling edge of source1
signal and the first falling edge of source2 signal.
Syntax
:MEASure:FFFDelay?
Returns
.
Note: Please select these two specific measured sources before implement the delay time
measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”