GW Instek GDS-2000 series Programming manual - Manual (Page 52)

GDS-2000 Series Programming Manual
52
:MEASure:FFRDelay? (query only)
Return the time value that difference time between the first falling edge of source1
signal and the first rising edge of source2 signal.
Syntax
:MEASure:FFRDelay?
Returns
.
Note: Please select these two specific measured sources before implement the delay time
measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”
:MEASure:FOVShoot? (query only)
Return the ratio of waveform amplitude that expressed the difference between the
low level and the negative peak level of the measured signal as it transitions from
its high state to its low state.
Syntax
:MEASure:FOVShoot?
Returns
with a symbol of percentage “%”.
Note: Please select the specific channel before implement any measurement. See
explanation for “:MEASure:SOURce”