GW Instek GDS-2000 series Programming manual - Manual (Page 54)

GDS-2000 Series Programming Manual
54
:MEASure:FRFDelay? (query only)
Return the time value that difference time between the first rising edge of source1
signal and the first falling edge of source2 signal.
Syntax
:MEASure:FRFDelay?
Returns
.
Note: Please select these two specific measured sources before implement the delay time
measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”
:MEASure:FRRDelay? (query only)
Return the time value that difference time between the first rising edge of source1
signal and the first rising edge of source2 signal.
Syntax
:MEASure:FRRDelay?
Returns
.
Note: Please select these two specific measured sources before implement the delay time
measurement. See explanation for “:MEASure:DELAY1 and :MEASure:DELAY2”