GW Instek GDS-2000 series Programming manual - Manual (Page 39)

GDS-2000 Series Programming Manual
39
CURSor:YPosition
Adjust the cursors position of Y axis.
Syntax
:CURSor:YPosition
:CURSor:YPosition?
Arguments
→Specify the cursor (1|2)
is the desired position. The range is 1 to 199.
Returns
→Returns position value of V1 or V2.
:CURSor:DELta? (query only)
Return the time or voltage diversity between the two vertical or horizontal cursors.
Syntax
:CURSor:XDELta?
:CURSor:YDELta?
Arguments
→Specify the time or voltage diversity (X|Y)
Returns