GW Instek PSM-Series User Manual - Manual (Page 9)

PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
⎯ ⎯
11
4-3. Display brief
1. Adrs
Set the power supply to the address of Listen or
Talk by using the interface card.
2. Rmt Set the power supply to Remote Control mode.
3. ERROR
The Error message appears when the command
from the Remote Controlled Interface is in error.
4. SHIFT Select the second level function.
5. AUTO Set the power supply to Auto mode.
6.
8V, 15V, 20V,
30V, 60V
The output ranges of power supply.
7. OVP
When the indicator lights up without blinking,
means the OVP function is on. When the Over
Voltage Protection function is triggered, the
indicator will be changed to blinking status, and
the message “OVP TRIPPED” will be displayed.
Now clear the OVP function. When the light of
indicator is off, means the OVP function is off.
8. OCP
When the indicator lights up without blinking,
means the OCP function is on. When the Over
Current Protection function is triggered, the
indicator will be changed to blinking status, and
the message “OCP TRIPPED” will be displayed.
Now clear the OCP function. When the light of
indicator is off, means the OCP function is off.
PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
⎯ ⎯
12
9. ＊
When the power supply is set to operation mode,
the symbol of “＊” will be lighted up.
z When the Output is on, the symbol of “＊”
lights up to indicate the power supply is in
the operation mode, when the meter
displays the measurement value, the
symbol of “＊” becomes blinking.
10. CC
The CC light is on to indicate the instrument is
in the CC mode.
11. CV
The CV light is on to indicate the instrument is
in the CV mode.
12.
The light of “ ” is on to indicate the buzzer is
on.
13. Lock
The Lock light is on to indicate the panel control
knobs is locked up.