GW Instek PSM-Series User Manual - Manual (Page 16)

PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
⎯ ⎯
25
z AUTO RANGE
AUTO RANGE Setting method: Press [SHIFT][AUTO RANGE] , use
knob to select the item for setting change.
For example: Set the AUTO RANGE to: START : 00 ; CEASE : 99 ;
CYCLE : 99999。
Press [SHIFT][AOTU RANGE] to enter AUTO RANGE setting item
selection, first select START and press [ENTER], then input [0][0]
[ENTER] to complete the change. Then input [9][9][ENTER] to CEASE
setting item to complete CEASE setting. Furthermore, input [9][9][9][9][9]
[ENTER] to CYCLE setting item to complete CYCLE setting. After
proceeding above setting, select SAVE to store the setting or select EXIT
to exit the setting without storing.
PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
⎯ ⎯
26