GW Instek PSM-Series User Manual - Manual (Page 23)

PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
⎯ ⎯
39
z The flow chart of the Auto Running Operation
PSM-SERIES PROGRAMMABLE POWER SUPPLY
USER MANUAL
⎯ ⎯
40
z The Remote voltage sensing of the front/rear panel terminals:
The remote voltage sensing circuit is to compensate the voltage drop
occurred on the power supply and load terminal during load adding.
When proceed the remote voltage sensing, the probe connected
between the output of power supply and the sensing terminal must be
removed. The output terminals of the front panel and rear panel is
parallel and connected with the sensing terminal, when use the
output of front panel, the sensing probe of the rear panel terminal
must be removed, and visa versa.
Figure 5-1：General output terminal sampling and output wiring