GW Instek PSW-Series Programming & Command manual - Manual (Page 88)

PSW Series Programming Manual
88
Parameter/
Return parameter 0 Disable
1 GPIB-USB adapter
2 Auto detect speed
3 Full speed only
Example SYST:COMM:USB:REAR:MODE 1
Sets the rear panel USB-B port mode to GPIB-USB
adapter.
SYSTem:ERRor
Query
Description Queries the error queue. The last error message is
returned. A maximum of 32 errors are stored in the
error queue.
Query Syntax SYSTem:ERRor?
Paramter/Return , Returns an error code followed by
an error message as a string. The
string is returned as “string”.
Example SYSTem:ERRor?
-100, “Command error”
SYSTem:KEYLock:MODE
Set
Query
Description Sets or queries the key lock mode. This setting is
the equivalent of the F-19 function setting.
Syntax
Query Syntax SYSTem:KEYLock:MODE {0|1}
SYSTem:KEYLock:MODE?
Parameter /
Return parameter 0 Panel lock: allow output off.
1 Panel lock: allow output on/off.
SYSTem:KLOCk
Set
Query
Description Enables or disables the front panel key lock.
Syntax
Query Syntax SYSTem:KLOCk { OFF | ON | 0 | 1}
SYSTem:KLOCk?
Parameter 0 Panel keys unlocked