GW Instek PSW-Series Programming & Command manual - Manual (Page 84)

PSW Series Programming Manual
84
SYSTem:COMMunicate:GPIB[:SELF]:ADDR
ess
Set
Query
Description Sets or queries the GPIB address. This setting is
applied only after the unit is reset.
Syntax
Query Syntax SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Parameter/Return 0~30
Example SYST:COMM:GPIB:SELF:ADDR 15
Sets the GPIB address to 15.
SYSTem:COMMunicate:LAN:IPADdress
Set
Query
Description Sets or queries LAN IP address. This setting is
applied only after the unit is reset.
Syntax
Query Syntax SYSTem:COMMunicate:LAN:IPADdress
SYSTem:COMMunicate:LAN:IPADdress?
Parameter/Return LAN IP address in string format ( “address”)
Applicable ASCII characters: 20H to 7EH
Example SYST:COMM:LAN:IPAD “172.16.5.111”
Sets the IP address to 172.16.5.111.
SYSTem:COMMunicate:LAN:GATEway
Set
Query
Description Sets or queries the Gateway address. This setting is
applied only after the unit is reset.
Syntax
Query Syntax SYSTem:COMMunicate:LAN:GATEway
SYSTem:COMMunicate:LAN:GATEway?
Parameter/Return Gateway address in string format ( “address”)
Applicable ASCII characters: 20H to 7EH
Example SYST:COMM:LAN:GATE “172.16.0.254”
Sets the LAN gateway to 172.16.0.254.