GW Instek PSW-Series Programming & Command manual - Manual (Page 62)

PSW Series Programming Manual
62
Parameter 0 Turns the output off when a software
trigger is generated.
OFF Turns the output off when a software trigger
is generated.
1 Turns the output on when a software
trigger is generated.
ON Turns the output on when a software trigger
is generated.
Return parameter Returns output trigger status of the
instrument.
OUTPut:PROTection:CLEar
Set
Description Clears over-voltage, over-current and over-
temperature (OVP, OCP, OTP) protection circuits.
It also clears the shutdown protection circuit. The
AC failure protection cannot be cleared.
Syntax OUTPut:PROTection:CLEar
OUTPut:PROTection:TRIPped
Query
Description Returns the state of the protection circuits (OVP,
OCP, OTP).
Query Syntax OUTPut:PROTection:TRIPped?
Return parameter 0 Protection circuits are not tripped.
1 Protection circuits are tripped.