GW Instek PSW-Series Programming & Command manual - Manual (Page 83)

REMOTE CONTROL
83
Syntax
SYSTem:CONFigure:OUTPut:PON[:STATe]
{OFF|ON|0|1}
Query Syntax SYSTem:CONFigure:OUTPut:PON[:STATe]?
Parameter 0 Output off at power up
OFF Output off at power up
1 Output on at power up
ON Output on at power up
Return Parameter 0 Output off at power up
1 Output on at power up
SYSTem:COMMunicate:ENABle
Set
Query
Description Enables/Disables LAN, GPIB or USB remote
interfaces as well as remote services (Sockets, Web
Server).
This setting is applied only after the unit is reset.
Syntax
Query Syntax SYSTem:COMMunicate:ENABle ,
SYSTem:COMMunicate:ENABle?
Parameter
OFF Turns the selected mode off.
0 Turns the selected mode off.
ON Turns the selected mode on.
1 Turns the selected mode on.
GPIB Select GPIB
USB Select USB
LAN Select LAN
SOCKets Select Sockets
WEB Select the web server
Return Parameter 0 The selected mode is off.
1 The selected mode is on.
Example SYST:COMM:ENAB 1,USB
Turns the USB interface on.
Query Example SYST:COMM:ENAB? USB
1
Queries the USB state, returns 1 (USB is on).