GW Instek PSW-Series Programming & Command manual - Manual (Page 85)

REMOTE CONTROL
85
SYSTem:COMMunicate:LAN:SMASk
Set
Query
Description Sets or queries the LAN subnet mask. This setting
is applied only after the unit is reset.
Syntax
Query Syntax SYSTem:COMMunicate:LAN:SMASk
SYSTem:COMMunicate:LAN:SMASk?
Parameter/Return Subnet mask in string format ( “mask”)
Applicable ASCII characters: 20H to 7EH
Example SYST:COMM:LAN:SMASk “255.255.0.0”
Sets the LAN mask to 255.255.0.0.
SYSTem:COMMunicate:LAN:MAC
Query
Description Returns the unit MAC address as a string. The
MAC address cannot be changed.
Query Syntax SYSTem:COMMunicate:LAN:MAC?
Return parameter Returns the MAC address in the following
format “FF-FF-FF-FF-FF-FF”
Example SYST:COMM:LAN:MAC?
02-80-AD-20-31-B1
Returns the MAC address.
SYSTem:COMMunicate:LAN:DHCP
Set
Query
Description Turns DHCP on/off. Queries the DHCP status.
This setting is applied only after the unit is reset.
Syntax
Query Syntax SYSTem:COMMunicate:LAN:DHCP {OFF | ON | 0 | 1}
SYSTem:COMMunicate:LAN:DHCP?
Parameter 0 DHCP off
OFF DHCP off
1 DHCP on
ON DHCP on
Return parameter 0 DHCP off
1 DHCP on