GW Instek PSW-Series Programming & Command manual - Manual (Page 77)

REMOTE CONTROL
77
2. The transient system for the trigger in BUS mode.
Example 2 TRIG:TRAN:SOUR BUS
CURR:TRIG MAX
VOLT:TRIG 5
INIT:NAME TRAN
TRIG:TRAN (or *TRG) <==The current changes to
the maximum, and the
voltage changes to 5V.
3. The output system for the trigger in immediate mode.
Example 3 TRIG:OUTP:SOUR IMM
OUTP:TRIG 1
INIT:NAME OUTP <==The output changes to
ON.
4. The output system for the trigger in BUS mode.
Example 4 TRIG:OUTP:SOUR BUS
OUTP:TRIG 1
INIT:NAME OUTP
TRIG:OUTP (or *TRG) <==The output changes to
ON.