GW Instek PSW-Series Programming & Command manual - Manual (Page 107)

REMOTE CONTROL
107
-112 Program
mnemonic too
long The header contains more that twelve
characters (see IEEE 488.2, 7.6.1.4.1).
-113 Undefined
header The header is syntactically correct, but it is
undefined for this specific device; for example,
*XYZ is not defined for any device.
-114 Header
suffix out of range The value of a numeric suffix attached to a
program mnemonic, see Syntax and Style
section 6.2.5.2, makes the header invalid.
-115 Unexpected
number of
parameters The number of parameters received does not
correspond to the number of parameters
expected. This is typically due an inconsistency
with the number of instruments in the selected
group.
-120 Numeric
data error This error, as well as errors -121 through -129,
are generated when parsing a data element
which apprears to be numeric, including the
nondecimal numeric types. This particular error
message should be used if the device cannot
detect a more specific error.
-121 Invalid
character in
number An invalid character for the data type being
parsed was encountered; for example, an alpha
in a decimal numeric or a “9" in octal data.
-128 Numeric
data not allowed A legal numeric data element was received, but
the device does not accept one in this position
for the header.
-131 Invalid suffix The suffix does not follow the syntax described
in IEEE 488.2, 7.7.3.2, or the suffix is
inappropriate for this device.