GW Instek PSW-Series Programming & Command manual - Manual (Page 60)

PSW Series Programming Manual
60
Output Commands
OUTPut:DELay:ON ............................................................ 60
OUTPut:DELay:OFF ........................................................... 60
OUTPut:MODE ................................................................... 61
OUTPut[:STATe][:IMMediate] ........................................... 61
OUTPut[:STATe]:TRIGgered ............................................. 61
OUTPut:PROTection:CLEar .............................................. 62
OUTPut:PROTection:TRIPped .......................................... 62
OUTPut:DELay:ON
Set
Query
Description Sets the Delay Time in seconds for turning the
output on. The delay is set to 0.00 by default.
Syntax
Query Syntax OUTPut:DELay:ON
OUTPut:DELay:ON?
Parameter 0.00~99.99 seconds, where 0=no delay.
Return parameter Returns the delay on time in seconds until the
output is turned on.
OUTPut:DELay:OFF
Set
Query
Description Sets the Delay Time in seconds for turning the
output off. The delay is set to 0.00 by default.
Syntax
Return Syntax OUTPut:DELay:OFF
OUTPut:DELay:OFF?
Parameter 0.00~99.99 seconds, where 0=no delay.
Return parameter Returns the delay off time in seconds until the
output is turned off.