GW Instek GBS-1000 Series User Manual - Manual (Page 116)

GBS-1000 Series User Manual
116
Panel operation 1. Connect the X-axis signal to Channel 1 (X1-axis)
and the Y-axis signal to CH2.
To compare more than one signal to the X-axis,
up to 2 more Y-axis signals can be compared by
connecting to signals to channels 3 and 4.
CH1 CH2 CH3 CH4
CAT 300V
MW 16pF
MAX. 300Vpk
1
CAT 300V
MW 16pF
MAX. 300Vpk
1
X1 Y1 Y2 Y3
2. Make sure at least one pair
of channels are activated
(LED On). Press the
appropriate Channel key if
necessary.
CH1
3. Press the Horizontal menu
key.
HORI
MENU