GW Instek GBS-1000 Series Programming Manual - Manual (Page 81)

COMMAND SET
81
1 >
2 =
3 ≠
Example :trigger:pulse:mode 1 Sets the triggering
condition to “>”.
:TRIGger:PULSe:TIMe
Set
Query
Description Select the time value for pulse width. The setting
range is from 20ns to 10s.
Same as: Trigger MENU key → F4(When) →
Variable knob. (When trigger mode = pulse)
Syntax < Long > < Short >
:trigger:pulse:time
:trig:pulse:time? :trig:puls:tim
:trig:puls:tim?
Parameter/Return
parameter Pulse width in seconds
Example :trigger:pulse:time?
>1.000E+01 The pulse width is 10
seconds.
:TRIGger:REJect
Set
Query
Description Sets or queries the frequency rejection mode.
Same as: Trigger MENU key →
F5(Slope/Coupling)→F3(Rejection).
Syntax < Long > < Short >
:trigger:reject < 0 | 1 | 2 >
:trig:reject? :trig:rej <0 | 1 | 2 >
:trig:rej?
Parameter/Return
parameter
0 Off
1 Low frequency rejection