GW Instek GBS-1000 Series Programming Manual - Manual (Page 80)

GBS-1000 Programming Manual
80
1 Auto
2 Normal
3 Single
Example :trigger:mode 1 Sets the trigger mode to
AUTO.
:TRIGger:NREJ
Set
Query
Description Sets or queries the state of the trigger noise
rejection function.
Same as: Trigger MENU key →
F5(Slope/Coupling) → F3(Noise rejection).
Syntax < Long > < Short >
:trigger:nrej < 0 | 1 >
:trig:nrej? :trig:nrej <0 | 1 >
:trig:nrej?
Parameter/Return
parameter
0 Noise rejection off.
1 Noise rejection on.
Example :trigger:nrej 1 Turns noise rejection
on.
:TRIGger:PULSe:MODe
Set
Query
Description Sets or queries the pulse mode trigger condition.
Same as: Trigger MENU key → F4(When).
(When trigger mode = pulse)
Syntax < Long > < Short >
:trigger:pulse:mode < 0 | 1 | 2 |
3 >
:trig:pulse:mode? :trig:puls:mod <0 | 1 |
2 | 3 >
:trig:puls:mod?
Parameter/Return
parameter
0 <