GW Instek GBS-1000 Series Programming Manual - Manual (Page 59)

COMMAND SET
59
:MEASure:FRRDelay
Query
Description Returns the delay between the first rising edge of
source1 and the first rising edge of source2.
Same as: Measure key → F1~F5 → F3 (DelayFRR)
Syntax < Long > < Short >
:measure:frrdelay? :meas:frrd?
Returns
Before this
command Select the two delay channels before entering this
command: :measure:delay1
and :measure:delay2 . See pagexx.
Example :measure:delay1 1
:measure:delay2 2
:measure:frrdelay? Select channel 1 and 2
as delay source1/2, and
then measure FRR.
:MEASure:LFFDelay
Query
Description Returns the delay between the first falling edge of
source1 and the last falling edge of source2.
Same as: Measure key → F1~F5 → F3 (DelayLFF)
Syntax < Long > < Short >
:measure:lffdelay? :meas:lffd?
Returns
Before this
command Select the two delay channels before entering this
command: :measure:delay1
and :measure:delay2 . See pagexx.
Example :measure:delay1 1
:measure:delay2 2
:measure:lffdelay? Select channel 1 and 2
as delay source1/2, and
then measure LFF.