GW Instek GBS-1000 Series Programming Manual - Manual (Page 25)

COMMAND SET
25
:CHANnel:COUPling
Set
Query
Description Selects or returns the coupling mode for each
channel.
Same as: Channel key → F1
Syntax < Long > < Short >
:channel:coupling
:channel:coupling? :chan:coup
:chan:coup?
Parameter Channel Coupling mode
1/2/3/4 CH1/2/3/4 0 AC coupling
1 DC coupling
2 Ground coupling
Example :channel1:coupling 1 Select DC coupling for
Channel 1
:CHANnel:DISPlay
Set
Query
Description Turns On/Off each channel or returns the status.
Same as: Channel key
Syntax < Long > < Short >
:channel:display
:channel:display? :chan:disp
:chan:disp?
Parameter Channel Channel On/Off
1/2/3/4 CH1/2/3/4 0 Off
1 On
Example :channel1:display 1 Turn On Channel 1