GW Instek GBS-1000 Series Programming Manual - Manual (Page 60)

GBS-1000 Programming Manual
60
:MEASure:LFRDelay
Query
Description Returns the delay between the first falling edge of
source1 and the last rising edge of source2.
Same as: Measure key → F1~F5 → F3 (DelayLFR)
Syntax < Long > < Short >
:measure:lfrdelay? :meas:lfrd?
Returns
Before this
command Select the two delay channels before entering this
command: :measure:delay1
and :measure:delay2 . See pagexx.
Example :measure:delay1 1
:measure:delay2 2
:measure:lfrdelay? Select channel 1 and 2
as delay source1/2, and
then measure LFR.
:MEASure:LRFDelay
Query
Description Returns the delay between the first rising edge of
source1 and the last rising edge of source2.
Same as: Measure key → F1~F5 → F3 (DelayLRF)
Syntax < Long > < Short >
:measure:lrfdelay? :meas:lrfd?
Returns
Before this
command Select the two delay channels before entering this
command: :measure:delay1
and :measure:delay2 . See pagexx.
Example :measure:delay1 1
:measure:delay2 2
:measure:lrfdelay? Select channel 1 and 2
as delay source1/2, and
then measure LRF.