GW Instek GBS-1000 Series Programming Manual - Manual (Page 69)

COMMAND SET
69
:MEASure:VPP
Query
Description Returns the peak-to-peak amplitude (difference
between maximum and minimum amplitude)
Same as: Measure key → F1~F5 → F3 (Vpp)
Syntax < Long > < Short >
:measure:vpp? :meas:vpp?
Returns
Before this
command Select the measurement channel before this
command: :measure:source . See pagexx.
Example :measure:source 1
:measure:vpp? Select channel 1, then
measure peak-to-peak
amplitude.
:MEASure:VRMS
Query
Description Returns the root-mean-square voltage.
Same as: Measure key → F1~F5 → F3 (Vrms)
Syntax < Long > < Short >
:measure:vrms? :meas:vrms?
Returns
Before this
command Select the measurement channel before this
command: :measure:source . See pagexx.
Example :measure:source 1
:measure:vrms? Select channel 1, then
measure root mean
square Voltage.