GW Instek GBS-1000 Series Programming Manual - Manual (Page 31)

COMMAND SET
31
4 Sets CH4 as the source channel
5 Sets Math as the source channel
Example :DATALOG:SOUR 1 Set source as CH1.
:DATALOG:SAVe
Set
Query
Description Sets the save type as waveform or image.
Syntax < Long > < Short >
:DATALOG:SAVe {0|1}
:DATALOG:SAVe? :DATALOG:SAV {0|1}
:DATALOG:SAV?
Parameter/
Return parameter 0 Save as image
1 Save as waveform
Example :DATALOG:SAVe 1 Set the save type to
waveform.
:DATALOG:INTerval
Set
Query
Description Sets or queries the interval time between each
recording.
Syntax < Long > < Short >
:DATALOG:INTerval
:DATALOG:INTerval? :DATALOG:INT
:DATALOG:INT?
Parameter/
Return parameter Discrete time intervals in seconds:
{2|3|4|5|10|20|30|60|120|300|600|1
200|1800}
Example :DATALOG:INT 2 Sets the interval time
to 2 seconds.
:DATALOG:DURation
Set
Query
Description Sets or queries the duration time of each recording.