GW Instek GBS-1000 Series Programming Manual - Manual (Page 66)

GBS-1000 Programming Manual
66
:MEASure:VAVerage
Query
Description Returns the average voltage.
Same as: Measure key → F1~F5 → F3 (Vavg)
Syntax < Long > < Short >
:measure:vaverage? :meas:vavg?
Returns
Before this
command Select the measurement channel before this
command: :measure:source . See pagexx.
Example :measure:source 1
:measure:vaverage? Select channel 1, then
measure average
Voltage.
:MEASure:VHI
Query
Description Returns the global high voltage.
Same as: Measure key → F1~F5 → F3 (Vhi)
Syntax < Long > < Short >
:measure:vhi? :meas:vhi?
Returns
Before this
command Select the measurement channel before this
command: :measure:source . See pagexx.
Example :measure:source 1
:measure:vhi? Select channel 1, then
measure global high
Voltage.