GW Instek GBS-1000 Series Programming Manual - Manual (Page 65)

COMMAND SET
65
:MEASure:SOURce
Set
Query
Description Selects the measurement channel.
Same as: Measure key → F1~F5 → F1, F2
Syntax < Long > < Short >
:measure:source
:measure:source? :meas:sour
:meas:sour?
Parameter
1 ~ 4 Channel1 ~ 4
Example :measure:source 1
:measure:rprshoot? Select channel 1, then
measure rise preshoot.
:MEASure:VAMPlitude
Query
Description Returns the voltage difference between positive and
negative peak.
Same as: Measure key → F1~F5 → F3 (Vamp)
Syntax < Long > < Short >
:measure:vamplitude? :meas:vamp?
Returns
Before this
command Select the measurement channel before this
command: :measure:source . See pagexx.
Example :measure:source 1
:measure:vamplitude? Select channel 1, then
measure rise Voltage
amplitude.