GW Instek GBS-1000 Series Programming Manual - Manual (Page 20)

GBS-1000 Programming Manual
20
Acquisition Command
:ACQuire:AVERage ...................................................... 20
:ACQuire:LENGth ........................................................ 21
:ACQuire:MODe .......................................................... 21
:ACQuire:MEMory ....................................................... 22
:ACQuire:HORexpand ................................................. 22
:ACQuire:AVERage
Set
Query
Description Selects or returns the average number of waveform
acquisition in average acquisition mode.
Same as: Acquire key → F3
Syntax < Long > < Short >
:acquire:average
:acquire:average? :acq:aver
:acq:aver?
Parameter Average No Average No
1 2 5 32
2 4 6 64
3 8 7 128
4 16 8 256
Before this
command
Before selecting the average number, select the
average acquisition mode using this command.
:ACQuire:MODe 2
Example :acquire:mode 2
:acquire:average 2 Set the acquisition mode
to average, then set the
average number to 4