GW Instek GBS-1000 Series Programming Manual - Manual (Page 79)

COMMAND SET
79
:TRIGger:FREQuency
Set
Query
Description Returns the readout value of the trigger frequency
counter.
Syntax < Long > < Short >
:trigger:frequency? :trig:freq?
Return parameter Frequency in Hz
Example :trigger:frequency?
> 1.000E+03 Returns the trigger
frequency (1000Hz).
:TRIGger:LEVel
Set
Query
Description Sets or queries the trigger level.
Same as: Trigger level knob.
Syntax < Long > < Short >
:trigger:level
:trig:level? :trig:lev
:trig:lev?
Parameter/Return
parameter Trigger level voltage
Example :trigger:level 0 Sets the trigger level to
0 volts.
:TRIGger:MODe
Set
Query
Description Sets or queries the trigger mode.
Same as: Trigger MENU key → F3(Mode).
Syntax < Long > < Short >
:trigger:mode <0 | 1 | 2 | 3>
:trig:mode? :trig:mod <0 | 1 | 2 | 3>
:trig:mod?
Parameter/Return
parameter
0 Auto level