GW Instek GBS-1000 Series Programming Manual - Manual (Page 49)

COMMAND SET
49
:TEMPlate:TOLerance
Set
Query
Description Sets or returns Go-NoGo Auto template tolerance.
Same as: Utility key → F5 (More) → F3 (Go-NoGo
Menu) → F1 (Template Edit) → F3 (Tolerance)
Syntax < Long > < Short >
:template:tolerance
:template:tolerance? :temp:tol
:temp:tol?
Parameter Auto template tolerance
0.4 ~ 40 0.4 ~ 40%
Before this
command... Go-NoGo auto template mode has to be selected prior
to this command.
:TEMPlate:MODe 1 (for details, see pagexx.)
Example :template:mode 1
:template:tolerance 10.0 Select auto template
mode, then set the
template tolerance to
10%.