GW Instek GBS-1000 Series Programming Manual - Manual (Page 74)

GBS-1000 Programming Manual
74
:REF:SAVe
Set
Description Saves an input signal as a reference waveform.
Same as: Save/Recall key → F4(Save waveform)→
F4(Save)
Syntax < Long > < Short >
:ref:save :refsav
Parameter Reference Source
1 A 1 Channel 1
2 B 2 Channel 2
3 C 3 Channel 3
4 D 4 Channel 4
5 Math
Example :ref1:save 1 Saves the Channel 1
signal as the reference
waveform A
:USB:RECall:SETup
Set
Description Recalls the last setup that was saved to the USB flash
drive. (Note: Only the last file can be recalled).
Same as: Save/Recall key → F5(More) → F3 (Recall
Setup)
Syntax < Long > < Short >
:usb:recall:setup :usb:rec:set
Example :usb:recall:setup Recalls the setup from
USB.