GW Instek GBS-1000 Series Programming Manual - Manual (Page 73)

COMMAND SET
73
Syntax < Long > < Short >
:ref:display
:ref:display? :refdisp
:refdisp?
Parameter Reference Reference on/off
1 A 0 off
2 B 1 on
Example :ref1:display 1 Turns on the reference
waveform A
:REF:LOCate
Set
Query
Description Moves or returns the position of a reference
waveform.
Same as: Save/Recall key → F5(More) → F5(More) →
F2 (Display Refs) → Variable knob
Syntax < Long > < Short >
:ref:locate
:ref:locate? :ref:loc
:ref:loc?
Parameter Reference Position
1 A –100 to +100
2 B
3 C
4 D
Note Before using this command, turn on a reference
waveform. See the example below.
Example :ref1:display 1
:ref1:locate 0 Turns on the reference
waveform A and move
it to ±0 position