GW Instek GBS-1000 Series Programming Manual - Manual (Page 75)

COMMAND SET
75
:USB:RECall:WAVeform
Set
Description Recalls a waveform from the USB and saves to a
reference waveform. (Note: Only the last saved file on
the USB flash driver can be recalled.)
Same as: Save/Recall key → F5(More) → F4(Recall
Waveform)
Syntax < Long > < Short >
:usb:recall:waveform :usb:rec:wav
Parameter Reference waveform
1 ~ 4 RefA ~ RefD
Example :usb:recall:waveform 1 Recall the waveform
from USB and save it to
Reference waveform A
:USB:SAVe:ALL
Set
Description Saves the panel setups, waveforms and screen shot to
the USB flash drive.
Same as: Save/Recall key → F5(More) → F2(Save All)
Syntax < Long > < Short >
:usb:save:all :usb:sav:all
:USB:SAVe:IMAGe
Set
Description Saves a screen shot to the USB flash drive.
Same as: Save/Recall key → F5(More) → F1(Save
Image)
Syntax < Long > < Short >
:usb:save:image :usb:sav:image