Additel 221A Multifunction Temperature Calibrator User Manual - Manual (Page 84)

________________________________________________________________________________________________________________
77
11.5 HART Setup
Whenthe measurement is active in HART communication mode, pressSetupto show the HART setup interface.The
calibrator provides five setup functions (refer to table 11‐1).
Table 11‐1
Setup Variables Attributes Description
Basic
Device Label Revisable
English input is available, no more than 8
characters
Primary variable range units Revisable
Can be changed into any units supported by
transmitter
Primary variable range lower
limit
Revisable
The setting range cannot be less than
transmitter range lower limit
Primary variable range
upper limit
Revisable
The setting range cannot exceed the transmitter
range upper limit
Damping time Revisable Float type，the value cannot be less than 0
Transfer function Revisable
Can be changed into linear transfer or rooting
transfer
Sensor
SensorS/N Unchangeable N/A
Sensor range lower limit Unchangeable N/A
Sensor range upper limit Unchangeable N/A
Sensor minimum span Unchangeable N/A