Additel 12X series pressure manifolds Datasheet User Manual

Pressure manifolds, Additel 12x series

Pressure / Process Calibration Equipment

Additel Datasheet 2014 / 2015

Corporate Headquarters

22865 Savi Ranch Parkway Ste F

Yorba Linda, CA 92887, USA

Salt Lake City Office

802 Bamberger Dr, Suite C

American Fork, UT 84003, USA

Phone: 714-998-6899

Fax: 714-998-6999

Phone: 801-756-5570

Fax: 714-998-6999

The 12X series pressure manifolds are designed for expanding pressure test ports during pressure calibration. The

Additel 121 pressure manifold is used for pneumatic pressure calibration up to 3,000 psi (200bar), while the Additel 123

manifolds is compatible to hydraulic pressure applications up to 15,000 psi (1,000 bar). A filter is built-in with the 121

pneumatic pressure manifold to prevent contamination introduced by devices under test. There are four hand-tight quick

connectors pre-installed on each manifold. Additel 12X series pressure manifolds allow you to connect without the use

of wrenches or Teflon tape which increases your productivity when using calibration pumps, pressure controllers, dead

weight testers, or piston gauges.

Model

Description

ADT121-N

1/4NPT male hose to four 1/4NPT female hand-tight quick connectors

ADT121-N2 1/2NPT male hose to four 1/2NPT female hand-tight quick connectors

ADT121-M

M20×1.5 male hose to four M20×1.5 female hand-tight quick connectors

ADT121-B

1/4BSP male hose to four 1/4BSP female hand-tight quick connectors

Model

Description

ADT123-N

1/4NPT male hose to four 1/4NPT female hand-tight quick connectors

ADT123-N2 1/2NPT male hose to four 1/2NPT female hand-tight quick connectors

ADT123-M

M20×1.5 male hose to four M20×1.5 female hand-tight quick connectors

ADT123-B

1/4BSP male hose to four 1/4BSP female hand-tight quick connectors

Pressure Manifolds

Note: A test hose is included with every Additel 12X pressure manifold.

121 series Pressure Manifolds

123 series Pressure Manifolds

Additel 12X Series

Pneumatic, -15 psi to 3,000 psi (-1 to 200 bar)

Hydraulic, -15 to 15,000 psi (-1 to 1,000 bar)