Additel 222A Multifunction Process Calibrator Datasheet - Manual

Pressure / Process Calibration Equipment
Additel Datasheet 2014 / 2015
Corporate Headquarters
22865 Savi Ranch Parkway Ste F
Yorba Linda, CA 92887, USA
Salt Lake City Office
802 Bamberger Dr, Suite C
American Fork, UT 84003, USA
Phone: 714-998-6899
Fax: 714-998-6999
Email: [email protected]
Phone: 801-756-5570
Fax: 714-998-6999
Email: [email protected]
Sourcing, simulating and measuring pressure,
temperature and electrical signals
Smartphone-like menu and interface make the
operation simple
The internal cold junction compensation sensor can
be re-calibrated at ice point by users
Ultra-compact, 3.9" x 7.6" x 2.0", and 1.6 lb (0.7 kg)
OVERVIEW
A highly integrated multifunction calibrator featuring several patented technologies. The 222A is an ultra-compact,
rugged, and easy to use hand-held device for sourcing, simulating and measuring pressure, temperature, and electrical
signals. Its smartphone-like menu and interface make the operation simple. The 222A is ideal for calibrating, maintaining,
and troubleshooting process instrumentation. Automation and documentation capabilities make the 222A a turnkey
solution.
Sourcing, simulating and measuring pressure, temperature and
electrical signals
Sources and measures mV, mA, ohms, RTDs,
thermocouples, frequency, and pulses
Simulates and measures 13 thermocouples, 11RTDs,
and pressure to calibrate transmitters
Measures and sources pressure using Additel 160 series
Intelligent Digital Pressure Modules from -15 psi to
10,000 psi (-1 bar to 700 bar)
24V loop power supply
Simultaneous dual reading capability
Automatic switch test
Supports square root transmitter
Pulse frequency output for the calibration of flow totalizer
Easy to use
Smartphone-like menu and interface make the operation
simpler and easier
Ultra-compact, size 3.9" x 7.6" x 2.0" (100mm x 192mm
x 52mm), and weight 1.6 lb (0.7 kg)
One hand operation
Calibrated cold junction compensation (Patented)
Cold junction equivalent block in the calibrator
A calibrated PRT element with flexible leads is installed
in the equivalent block for thermocouple cold junction
compensation
This PRT element can be pulled out from the calibrator
and re-calibrated and corrected at ice point by users
Built-in temperature readout
CVD coefficients of a calibrated PRT can be input into
the calibrator for accurate temperature measurement.
Multi lingual interface
English, German, French, Italian, Spanish, Portuguese,
Simplified Chinese(Traditional Chinese, Japanese and
Russian are available per request)
Documenting and automated procedure capability
Manage the information of the device under test
Set up automated calibration procedures, and the
Additel 222A performs the test, calculates the errors,
displays and/or stores the results in the memory, and
highlights the out-of-tolerance points.
As-found and As-left functions allow recording and
documenting results for quality control.
Download tasks and upload the results
Snapshots allow you to capture and save work.
Build-in unit conversion tool
Build-in converters for pressure units, temperature
units, temperature vs. resistance (RTDs), and
temperature vs. millivolt (thermocouples)
Display
3.5 inch TFT color screen
Rugged
Rugged design for harsh environments.
Passed a 1-meter drop test
Three year warranty for the ADT222A, and one year
for the battery pack
Misuse protection
Up to 30V voltage on any two sockets and up to
1A current on current sockets will not damage the
calibrator. The calibrator will return to normal condition
as soon as the voltage or current is removed.
Rechargeable battery
Rechargeable Li-ion battery for 15 hours uninterrupted
use.
Battery life will be reduced when 24V is applied
The rechargeable battery is replaceable.
NIST Traceable Calibration with data
Warranty: 3 years
FEATURES
Multifunction Process Calibrator
Additel 222A